TF3

Pharmaworks TF3 Thermoformer

Overview

The TF3 is a compilation of proven concepts from our TF1, TF1e and TF2X . This machine  scales these concepts up to a larger machine with a format range of 220mm x 290mm.

Take a moment to review the tooling, standard features and options available for the TF3.

Tooling

  • Tool-less change-over
  • Tooling is completely tested at Pharmaworks prior to shipping (Pharmaworks is committed to keeping a running TF3 in-house for tool testing)
  • A setup and testing sheet is provided with each tool set, reflecting factory recommended parameters.  This is essential to quick and efficient start-up of new tooling.

Standard Features

  • Servo forming indexer, Servo Seal indexer
  • Laser feedback for seal registration
  • Contact heating
  • Modular feed area
  • Material shredder
  • Single row punch
  • Large blister punch (same station)
  • Single blister reject

Options

  • Print registration (stretcher)
  • Die punch registration using laser feedback
  • Vision (scanware spectra-HR/ CL color system for product inspection)
  • Vision (scanware pri-con print verification system)
  • Feeders (manual feed trays, flood feeders, dedicated feeders and robotic feeding)
  • Base and Lidding low roll level detection
  • Plug assist
  • Various printer systems can be easily integrated to the TF1
  • Material stretcher (for continuous style printers)
  • Auto-lift seal station
  • Single blister reject
  • Material buffer

 

Specifications
Max. Format Range 220mm x 290mm
Max. Forming Depth 40mm
Max. Base Material Roll Size 800mm
Max Lid Roll Size 300mm

 

Dimensions
Length 23 ft

 

Utilities
Voltage 220-240 VAC, Three Phase
Amperage 45-55 Amps (dependent on subsystems)
Compressed Air 100 PSI @ 25 CFM
Live Chat